- Thank you received: 0
×
Questions about G400/G410 Cards.
Elastix 2.0.3 + G400E
12 years 5 months ago #7472
by bert
Hi
Please give more details.Could you provide remote ssh?You can add my msn:[email protected]
Please give more details.Could you provide remote ssh?You can add my msn:[email protected]
12 years 5 months ago #7475
by bert
Hi
Please show the log of the errors!what's the version of chan-extra you are using?Please refer: http://downloads.openvox.cn/pub/manuals/V2.1/English/G400E%20User%20manual.pdf
Note:Don't exec "make samples" after asterisk installed.
Please show the log of the errors!what's the version of chan-extra you are using?Please refer: http://downloads.openvox.cn/pub/manuals/V2.1/English/G400E%20User%20manual.pdf
Note:Don't exec "make samples" after asterisk installed.
12 years 5 months ago #7483
by svaadm
I'm using Elastix 2.0.3 64bit and have been trying to install G400E card with chan_extra-1.2.0 driver. The driver won't install, and I think the reason for that is that installation scripts presuppose that files are located in /usr/lib and lib however the files required for the script are actually located in /usr/lib64 and lib64.
Please help me find chan_extra driver that could be installed on Elastix 2.0.3 64bit.
Here's the logfile of failed installation: http://dl.dropbox.com/u/16160978/install.log.2011-10-29-22-09
Please help me find chan_extra driver that could be installed on Elastix 2.0.3 64bit.
Here's the logfile of failed installation: http://dl.dropbox.com/u/16160978/install.log.2011-10-29-22-09
12 years 5 months ago #7489
by bert
Hi
I found there were some dependencies you hadn't installed.Please install them before installing chan-extra . Beacuse of the limitations of the script , I recommend you use "Source code install",and just note: do not execute "make samples"after the script help you install asterisk.
I found there were some dependencies you hadn't installed.Please install them before installing chan-extra . Beacuse of the limitations of the script , I recommend you use "Source code install",and just note: do not execute "make samples"after the script help you install asterisk.
12 years 5 months ago #7496
by svaadm
Once Source code install has been finalized all files installed in /lib and /usr/lib folders. I have replaced /usr/lib64/asterisk/modules folder with /usr/lib/asterisk/modules folder and also copied libgsmat.a, libgsmat.so, libgsmat.so.1.0 files from /usr/lib folder into /usr/lib64 folder/ After that chan_extra.so module loaded sucessfully. However, once DAHDI initialization is attempted, the following messages appear:
i] Last edited by svaadm at 2011-10-31 16:12 [/i
[root@srv03 asterisk]# service dahdi start
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
opvxd115: FATAL: Module opvxd115 not found.
[FAILED]
wcte12xp: [ OK ]
wct1xxp: [ OK ]
wcte11xp: [ OK ]
wctdm24xxp: [ OK ]
wcfxo: [ OK ]
wctdm: [ OK ]
wcb4xxp: [ OK ]
wctc4xxp: [ OK ]
xpp_usb: [ OK ]
opvxa1200: FATAL: Module opvxa1200 not found.
[FAILED]
ystdm8xx: FATAL: Module ystdm8xx not found.
[FAILED]
ystdm16xx: FATAL: Module ystdm16xx not found.
[FAILED]
ap400: FATAL: Module ap400 not found.
[FAILED]
dahdi_dynamic_eth: [ OK ]
dahdi_dynamic_ethmf: [ OK ]
ax1600p: FATAL: Module ax1600p not found.
[FAILED]
zaphfc: FATAL: Module zaphfc not found.
[FAILED]
wcopenpci: FATAL: Module wcopenpci not found.
[FAILED]
rxt1: DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================
Channel map:
0 channels to configure.
[ OK ]
r1t1: DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================
Channel map:
0 channels to configure.
[ OK ]
rcbfx: DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================
Channel map:
0 channels to configure.
[ OK ]
No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg: [ OK ]i] Last edited by svaadm at 2011-10-31 16:12 [/i
Time to create page: 0.050 seconds